Skip to content
Skip to product information
Description

Epoke Epoxy Resin and Hardner for Resin Art -

Epoke Art range of products are designed to cater to the performance needs of Hobbyists and Professional users alike. Each product has been conceptualised laying emphasis on ease of use, consistent performance and to produce flawless results that are built for the long haul.

Epoke Art Epoxy Resin is high gloss, transparent, crystal clear resin system which is specially designed for coating, casting and lamination applications. Be it for beautifully clear and glossy coatings, resin flow art, free form geodes, jewellery making, encapsulation or even for coating wood or making river tables, Epoke Art Epoxy resin would be the ideal for all creative projects. Made for artists by epoxy specialists, this formula is chemically engineered to offer the most efficient non-yellowing protection on the market and is non-toxic and safe for home use. The resin 900gms + hardener 300gms kit covers approximately 8-10 sq. Feet.2 to 3 sq feet.

How to Use Epoke Epoxy Resin and Hardner for Resin -
  • Measure - Measure and pour the resin and hardener into a mixing cup, in the ratio 3:1 by weight.
  • Mix - Stir well for at least 5 minutes. Try not to incorporate air into the system while mixing. Scrape the sides and the bottom to make sure you’re being thorough. Unmixed material could leave you with sticky spots that just won’t cure. Once you mix the resin and hardener, you will have about 45 minutes of working time before the resin starts to thicken and cure.
  • Tip - Tending to air bubbles incorporated during mixing - After mixing for 5 minutes, keep this mix away for 10 minutes. Most of the bubbles in the mix will come up to the surface and pop automatically. Un-popped bubbles can be popped using a hot air gun or blow torch.
  • Step 1 Pour - After making sure your piece is level, go ahead and pour EPOKE Art Epoxy Resin over your work. Since EPOKE Art Resin is self-levelling it will start to level on its own, and you can spread it around into place. Let the resin run over the edges and then just use a brush to tidy it up. You may again notice bubbles rising to the surface of the coating. Most of the bubbles will pop on their own, as EPOKE Art Resin is specially formulated to do so. You may use a hot air gun or blow torch once again over un-popped bubbles if required. Just mild heat and a gently swipe over the surface would suffice.
  • Step 2 Wait - Epoke Art Epoxy Resin needs to sit for several hours in a dust-free space while it cures. In about 8 hours, the surface could be mildly tacky, but you will be able to pour a second coat if necessary. In about 12 hours it will be dry to the touch, and within 24 hours it will be 95% cured which is good for handling strength. It will be fully cured within 72 hours.
Country of Origin: India

Epoke Epoxy Resin and Hardner for Resin Art 3:1

Regular price Rs. 630.00
Out of stock

Tax included. Shipping calculated at checkout

Description

Epoke Epoxy Resin and Hardner for Resin Art -

Epoke Art range of products are designed to cater to the performance needs of Hobbyists and Professional users alike. Each product has been conceptualised laying emphasis on ease of use, consistent performance and to produce flawless results that are built for the long haul.

Epoke Art Epoxy Resin is high gloss, transparent, crystal clear resin system which is specially designed for coating, casting and lamination applications. Be it for beautifully clear and glossy coatings, resin flow art, free form geodes, jewellery making, encapsulation or even for coating wood or making river tables, Epoke Art Epoxy resin would be the ideal for all creative projects. Made for artists by epoxy specialists, this formula is chemically engineered to offer the most efficient non-yellowing protection on the market and is non-toxic and safe for home use. The resin 900gms + hardener 300gms kit covers approximately 8-10 sq. Feet.2 to 3 sq feet.

How to Use Epoke Epoxy Resin and Hardner for Resin -
  • Measure - Measure and pour the resin and hardener into a mixing cup, in the ratio 3:1 by weight.
  • Mix - Stir well for at least 5 minutes. Try not to incorporate air into the system while mixing. Scrape the sides and the bottom to make sure you’re being thorough. Unmixed material could leave you with sticky spots that just won’t cure. Once you mix the resin and hardener, you will have about 45 minutes of working time before the resin starts to thicken and cure.
  • Tip - Tending to air bubbles incorporated during mixing - After mixing for 5 minutes, keep this mix away for 10 minutes. Most of the bubbles in the mix will come up to the surface and pop automatically. Un-popped bubbles can be popped using a hot air gun or blow torch.
  • Step 1 Pour - After making sure your piece is level, go ahead and pour EPOKE Art Epoxy Resin over your work. Since EPOKE Art Resin is self-levelling it will start to level on its own, and you can spread it around into place. Let the resin run over the edges and then just use a brush to tidy it up. You may again notice bubbles rising to the surface of the coating. Most of the bubbles will pop on their own, as EPOKE Art Resin is specially formulated to do so. You may use a hot air gun or blow torch once again over un-popped bubbles if required. Just mild heat and a gently swipe over the surface would suffice.
  • Step 2 Wait - Epoke Art Epoxy Resin needs to sit for several hours in a dust-free space while it cures. In about 8 hours, the surface could be mildly tacky, but you will be able to pour a second coat if necessary. In about 12 hours it will be dry to the touch, and within 24 hours it will be 95% cured which is good for handling strength. It will be fully cured within 72 hours.
Country of Origin: India
Drawer Title
Similar Products