Epoke Art EFX Epoxy Resin Kit 2:1 Ratio -
Epoke EFX Epoxy Resin is a 2 part, high gloss, transparent, crystal clear resin system which is specially designed for coating, casting and lamination applications.Be it for beautifully clear and glossy coatings, resin flow art, free form geodes, jewellery making, encapsulation or even for coating wood or making river tables, Epoke EFX Epoxy resin would be the ideal fit for your needs.
Features :
- Clear colorless liquids rendering a Crystal Clear coating or cast when cured.
- Low odour,Low VOC, Zero Solvents, Zero Fumes
- Honey like consistency
- Pot life of 15-20 minutes
- Cure to the touch in 3hours (@25 Deg C)
- Perfect control over resin art patterns
- Maintain perfect lines for Geode Art
- Excellent retention of patterns
- Easy to create cells and retain it
- Recommended for pigmented coatings
- Ready to re-coat or hang in 3 hours
- Always re-coat with EPOKE Art Resin for a high gloss, heat resistant finish.
How to use Epoke EFX Epoxy Resin?
Measure - With gloves on , using a weighing scale measure the resin and hardner in a ratio by weight i.e. 3:1 OR 2:1. As per your requirement.
Mix -
- Stir well for at least 5 minutes or until completely clear
- Try not to incorporate air in to the system while mixing.
- Scrape the sides and the bottom to make sure you’re being thorough.
- Unmixed material could leave you with sticky spots that just won’t cure.
- Once you mix the resin and hardener, you will have about 45 minutes of working time before the resin starts to thicken and cure.
1 Step -
- After making sure your piece is level, go ahead and pour Epoke EFX Epoxy Resin over your work. Since EPOKE Art Resin is self-leveling it will start to level on its own, and you can spread it around into place. Let the resin run over the edges and then just use a brush to tidy it up.
- You may again notice bubbles rising to the surface of the coating. Most of the bubbles will pop on their own, as EPOKE Art Resin is specially formulated to do so. You may use a hot air gun or blow torch once again over un-popped bubbles if required. Just mild heat and a gently swipe over the surface would suffice.
2 Step -
- Epoke EFX Epoxy Resin needs to sit for several hours in a dust-free space while it cures. In about 8 hours, the surface could be mildly tacky but you will be able to pour a second coat if necessary. In about 12 hours it will be dry to the touch, and within 24 hours it will be 95% cured which is good for handling strength. It will be fully cured within 72 hours.