Skip to content
Skip to product information
Description

Liquitex Flow Aid Additive Professional Acrylic Mediums

This product also acts as an acrylic retarder for acrylic painting.
 
What it does
  • Breaks water tension to improve flow and lower viscosity
  • Gives a smooth finish with less brush strokes due to reduced surface friction
  • Increases transparency and makes color more absorbent and blendable
How to use it
  • Fully intermixable with all Liquitex products
  • First dilute your concentrated Flow Aid with water - 1 part Flow Aid to 20 parts water - distilled water will give the best results. Use 1 part Flow Aid to 10 parts water if you want a more concentrated effect
  • Add up to 25% of diluted Flow Aid to your color/medium and stir slowly to avoid foaming. If it does foam, leave it to sit while the foam disappears
  • If applying to an absorbent surface, your color/medium will sink in like a stain or dye; if using on a non-absorbent surface your color/medium will be more fluid and take longer to dry
How not to use it
  • Do not use Flow Aid undiluted as it results in poor acrylic adhesion, cracking, tackiness and water sensitivity
  • As this is an additive – with no acrylic binders - do not add more than 25% to your color/medium and do not mix with other additives. This can cause excessive shrinkage, cracking and the acrylic film to break down
  • Do not shake or stir too vigorously as foam will form
  • Don't use for marbling as it breaks the surface tension of the water
  • Do not use with any non-acrylic media

 

Country of Origin: France

Liquitex Flow Aid Additive Professional Acrylic Mediums 118 ML

Sale price Rs. 721.75
Regular price Rs. 849.00You saved 15% OFF
Out of stock

Tax included. Shipping calculated at checkout

Description

Liquitex Flow Aid Additive Professional Acrylic Mediums

This product also acts as an acrylic retarder for acrylic painting.
 
What it does
  • Breaks water tension to improve flow and lower viscosity
  • Gives a smooth finish with less brush strokes due to reduced surface friction
  • Increases transparency and makes color more absorbent and blendable
How to use it
  • Fully intermixable with all Liquitex products
  • First dilute your concentrated Flow Aid with water - 1 part Flow Aid to 20 parts water - distilled water will give the best results. Use 1 part Flow Aid to 10 parts water if you want a more concentrated effect
  • Add up to 25% of diluted Flow Aid to your color/medium and stir slowly to avoid foaming. If it does foam, leave it to sit while the foam disappears
  • If applying to an absorbent surface, your color/medium will sink in like a stain or dye; if using on a non-absorbent surface your color/medium will be more fluid and take longer to dry
How not to use it
  • Do not use Flow Aid undiluted as it results in poor acrylic adhesion, cracking, tackiness and water sensitivity
  • As this is an additive – with no acrylic binders - do not add more than 25% to your color/medium and do not mix with other additives. This can cause excessive shrinkage, cracking and the acrylic film to break down
  • Do not shake or stir too vigorously as foam will form
  • Don't use for marbling as it breaks the surface tension of the water
  • Do not use with any non-acrylic media

 

Country of Origin: France
Drawer Title
Similar Products